BGA rework station prism alignment issue, please Advice/Help

Place your before and after pictures here and any repair tips you may have .Remember no Rgh/Jtag work.

BGA rework station prism alignment issue, please Advice/Help

Postby Simeon » Sun Mar 01, 2015 6:23 pm

hello every one, recently i purchased a BGA rework station with optical alignment but something is not right with the prism system. When align the chip it appear to be aligned only in the center area, the sides and the corners has a distortion and the dots are not one above another. Please advice,this the video show the actual issue https://www.youtube.com/watch?v=C-IGw2J ... e=youtu.be
Simeon
New Member
New Member
Progress to next rank:
60%
 
Posts: 3
Joined: Sun Mar 01, 2015 5:57 pm
Has thanked: 0 time
Been thanked: 0 time

BGA rework station prism alignment issue, please Advice/Help

Sponsor

Sponsor
 

Re: BGA rework station prism alignment issue, please Advice/

Postby BGA Rework Store » Sun Mar 01, 2015 6:33 pm

What machine is it buddy
User avatar
BGA Rework Store
VIP Member
VIP Member
 
Posts: 1517
Joined: Sun Jun 17, 2012 8:47 pm
Location: North london
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 413 times
Set up: T8280 and ayoue 968 scotle ir6000 pr1000 lcd separator

Re: BGA rework station prism alignment issue, please Advice/

Postby Simeon » Mon Mar 02, 2015 4:30 am

It looks the same as ZM-R6200 but different brand, I don't to advertise this company since they couldn't t help me to resolve my issues.
Simeon
New Member
New Member
Progress to next rank:
60%
 
Posts: 3
Joined: Sun Mar 01, 2015 5:57 pm
Has thanked: 0 time
Been thanked: 0 time

Re: BGA rework station prism alignment issue, please Advice/

Postby BGA Rework Store » Mon Mar 02, 2015 11:51 am

Best bet to post up some pics then do some close ups if possible
User avatar
BGA Rework Store
VIP Member
VIP Member
 
Posts: 1517
Joined: Sun Jun 17, 2012 8:47 pm
Location: North london
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 413 times
Set up: T8280 and ayoue 968 scotle ir6000 pr1000 lcd separator

Re: BGA rework station prism alignment issue, please Advice/

Postby erhanzeynel » Sun Sep 18, 2016 7:07 pm

Your youtube denied my access but your telling like it's focus Issue.
Try turn your prism camera lens bit clockwise. There may be a little screw to lock lens. You must lose it first.

Good luck.
erhanzeynel
Dedicated Member
Dedicated Member
Progress to next rank:
20%
 
Posts: 21
Joined: Sun Sep 18, 2016 6:10 pm
Location: Turkey
National Flag:
Turkey
Has thanked: 7 times
Been thanked: 1 time
Set up: sunline 852D+ SMD rework station


Return to Showcase Your Repairs, Tips & Tricks

Who is online

Users browsing this forum: No registered users and 0 guests

cron