BGA own made(new project)

Forum for all DIY topics.

Re: BGA own made(new project)

Postby pcservis7 » Wed Sep 14, 2016 9:05 pm

Hello,
I left after 4mm between the heaters and 3mm between the heater and machine case.


soindrex wrote:Hello.This is my first post on this forum.I am planning to build a bga rework station. The ceramic IR heaters I plan to use for the bottom are sized 245mm X 60mm rated at 600W each. What should be the spacing between adjacent panels? Will 10mm be O.K?

Sent from my HM 1S using Tapatalk
User avatar
pcservis7
Dedicated Member
Dedicated Member
Progress to next rank:
50%
 
Posts: 15
Joined: Sat Jan 09, 2016 8:14 pm
Location: Srbija
National Flag:
Serbia & Montenegro
Has thanked: 6 times
Been thanked: 0 time

Re: BGA own made(new project)

Sponsor

Sponsor
 

Re: BGA own made(new project)

Postby donanimpazari » Tue Feb 27, 2018 11:50 am

I'm writing this message with google translate.

I will buy ir 6500 materials.

I need a working cable connection diagram.

I need a 100% working ir6500 diagram
donanimpazari
New Member
New Member
Progress to next rank:
20%
 
Posts: 1
Joined: Tue Feb 27, 2018 10:56 am
Location: Turkey
Has thanked: 0 time
Been thanked: 0 time
Set up: ir6500

Re: BGA own made(new project)

Postby blonzi81 » Wed Jun 20, 2018 8:23 pm

Hy ,what is L and N,and if i want to put also a DC 12V -30~800℃ Digital Thermometer Temperature Test Panel Meter +K Thermocouple.but i do not now how to wire and 4 fans,can you help me please?
blonzi81
New Member
New Member
Progress to next rank:
40%
 
Posts: 7
Joined: Wed Jun 20, 2018 8:12 pm
Location: UNITED KINDOM
Has thanked: 0 time
Been thanked: 0 time
Set up: HOME MADE

Re: BGA own made(new project)

Postby code0102stinks » Thu Jun 21, 2018 9:11 pm

blonzi81 wrote:Hy ,what is L and N,and if i want to put also a DC 12V -30~800℃ Digital Thermometer Temperature Test Panel Meter +K Thermocouple.but i do not now how to wire and 4 fans,can you help me please?


"L" is for "Line" (220VAC in your country). "N" is for Neutral. Any 12VDC accessories on your machine would have to be powered by a transformer that converts your
220VAC to 12VDC. This is basic stuff. You might want to buy a manufactured machine or have someone experienced to build you one.
code0102stinks
VIP Member
VIP Member
 
Posts: 707
Joined: Sun Dec 09, 2012 5:18 pm
Location: WA, US
National Flag:
United States of America
Has thanked: 78 times
Been thanked: 234 times
Set up: DIY Hot Air Top Heater and Nozzle. Modded T8280 Preheater

Re: BGA own made(new project)

Postby blonzi81 » Thu Jun 21, 2018 9:19 pm

Thank you ,i will try to build one.
blonzi81
New Member
New Member
Progress to next rank:
40%
 
Posts: 7
Joined: Wed Jun 20, 2018 8:12 pm
Location: UNITED KINDOM
Has thanked: 0 time
Been thanked: 0 time
Set up: HOME MADE

Re: BGA own made(new project)

Postby code0102stinks » Thu Jun 21, 2018 9:31 pm

Deus posted a schematic of his Achi years ago. You are using a REX C100 I think, right? Those are relay output stock instead of logic output. If you buy
one on Ebay along with a type DA SSR, then they did the relay mod to it already to work with the SSR they are selling it with, but if yours is still relay
output, then you need to mod it to work with the typical type DA SSR.

His pic is posted in this thread. viewtopic.php?f=11&t=3730&p=40074&hilit=+schematic&sid=1340a60165b02bf9cc2e33902cdec700#p40074
code0102stinks
VIP Member
VIP Member
 
Posts: 707
Joined: Sun Dec 09, 2012 5:18 pm
Location: WA, US
National Flag:
United States of America
Has thanked: 78 times
Been thanked: 234 times
Set up: DIY Hot Air Top Heater and Nozzle. Modded T8280 Preheater

Re: BGA own made(new project)

Postby blonzi81 » Fri Jul 06, 2018 10:07 pm

Can you draw the wiring scheme for your BGA?
blonzi81
New Member
New Member
Progress to next rank:
40%
 
Posts: 7
Joined: Wed Jun 20, 2018 8:12 pm
Location: UNITED KINDOM
Has thanked: 0 time
Been thanked: 0 time
Set up: HOME MADE

Previous

Return to DIY Forum

Who is online

Users browsing this forum: No registered users and 1 guest

cron