BGA own made(new project)

Forum for all DIY topics.

Re: BGA own made(new project)

Postby pcservis7 » Wed Sep 14, 2016 9:05 pm

Hello,
I left after 4mm between the heaters and 3mm between the heater and machine case.


soindrex wrote:Hello.This is my first post on this forum.I am planning to build a bga rework station. The ceramic IR heaters I plan to use for the bottom are sized 245mm X 60mm rated at 600W each. What should be the spacing between adjacent panels? Will 10mm be O.K?

Sent from my HM 1S using Tapatalk
User avatar
pcservis7
Dedicated Member
Dedicated Member
Progress to next rank:
50%
 
Posts: 15
Joined: Sat Jan 09, 2016 8:14 pm
Location: Srbija
National Flag:
Serbia & Montenegro
Has thanked: 6 times
Been thanked: 0 time

Re: BGA own made(new project)

Sponsor

Sponsor
 

Re: BGA own made(new project)

Postby donanimpazari » Tue Feb 27, 2018 11:50 am

I'm writing this message with google translate.

I will buy ir 6500 materials.

I need a working cable connection diagram.

I need a 100% working ir6500 diagram
donanimpazari
New Member
New Member
Progress to next rank:
20%
 
Posts: 1
Joined: Tue Feb 27, 2018 10:56 am
Location: Turkey
Has thanked: 0 time
Been thanked: 0 time
Set up: ir6500

Previous

Return to DIY Forum

Who is online

Users browsing this forum: No registered users and 3 guests