Xbox 360 ERROR CODES with Description

Xbox 360 guides and tutorials.

Xbox 360 ERROR CODES with Description

Postby brett1 » Fri Jul 20, 2012 1:03 pm

--==SECONDARY ERROR CODES==-
The specific type of hardware failure can be determined by a "hidden" error code

Turn the xbox 360 on, and wait till the 3 red lights are flashing.
Press and hold the sync up button (the small white one), while holding that button press the eject button.
The LEDs will now blink the first number in the code (as described below).
Release the eject button and press it again.
The LEDs will now blink the second number of the code.
Release the eject button and press it again.
The LEDs will now blink the third number of the code.
Release the eject button and press it again.
The LEDs will now blink the forth number of the code.
Release the eject button and press it again.
The LEDs will go back to the 3 red flashing lights.

You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:

All four lights flashing - 0
One light flashing - 1
Two Lights flashing - 2
Three lights flashing - 3


/ \
\ / 0 RED LIGHTS

E26 - 0122 - CPU/GPU overheating on XBOX 360 Slim
No Audio/Video - Cold solder joint under the GPU/HANA - GPU REFLOW
No power (Red light on PSU) - Faulty PSU/Short on console
Middle light flashing and no boot - GPU REFLOW

/ \
\ / 1 RED LIGHT

E64 - 1000 - Bad DVD flash/ dead flash chip(Timeout)
E65 - 1001 - Bad DVD flash/ dead flash chip(DMA)
E66 - 1002 - Wrong DVD drive version - DRIVE IS LIKELY SPOOFED AS ANOTHER SO REPLACE WITH THE CORRECT MODEL
E67 - 1003 - Broken HDD(Timeout) - REMOVE HDD AND BOOT TEST
E68 - 1010 - Broken HDD(DMA) - REMOVE HDD AND BOOT TEST
E69 - 1011 - Broken HDD(HDDSS) - REMOVE HDD AND BOOT TEST
E70 - 1012 - HDD File system error/HDD Not Found - REMOVE HDD AND BOOT TEST
E71 - 1013 - Dashboard update error (NAND related)
E72 - 1020 - NAND issue (loose pin/ bad flash)
E73 - 1021 - Cold solderjoint - Ethernet/Southbridge/GPU - GPU REFLOW/REPLACE GPU/SB REFLOW/SB REBALL
E74 - 1022 - Cold solder joint under GPU/Dead GPU - GPU REFLOW/REBALL/REPLACE GPU
E75 - 1023 - Network chip cold joint/ wrong vendor
E76 - 1030 - Dead network chip
E77 - 1031 - Dead network chip
E78 - 1032 - AsicId check failed
E79 - 1033 - Broken Hdd(Xam.xex)
E80 - 1100 - NAND - Wrong LDV Version

/ \
\ / 2 RED LIGHTS

E05 - 0011 - CPU over heating - REPASTE CPU/REFLOW CPU
E06 - 0012 - GPU is over heating - REPASTE GPU/REFLOW GPU
E07 - 0013 - RAM over heating/cold solder joint under RAM - PUSH ON EACH RAM BRICK INDIVIDUALLY AND CHECK FOR BOOT

/ \
\ / 3 RED LIGHTS

E00 - 0000 - Cold solder joint under Southbridge - SOUTHBRIDGE REFLOW
E01 - 0001 - power supply problem/short circuit
E02 - 0002 - cold solder joint under CPU - CPU REFLOW
E03 - 0003 - Power supply problem/ Cold solder joint under CPU/ Dead GPU
E04 - 0010 - Cold solder joint under Southbridge - REFLOW SB
E08 - 0020 - Bridged solder joint/short under CPU/GPU/RAM - GPU REBALL
E09 - 0021 - Bridged solder joint/short under GPU/Southbridge or Damaged Ethernet Controller - GPU REFLOW/SB REFLOW
E10 - 0022 - Bridged solder joint/short under GPU - GPU REBALL
E12 - 0030 - Cold solder joint under CPU/ Temp sensor problem - CPU REFLOW(CAN ALSO BE HANA RELATED, REFLOW HANA)
E13 - 0031 - Short on board or faulty RAM brick - CHECK HEATSINK ISNT SHORTING
E16 - 0100 - Cold solder joint under GPU - GPU REFLOW
E17 - 0101 - Bridged pins in USB port - UNBRIDGE PINS
E18 - 0102 - Cold solder joint under either CPU/GPU/RAM - REFLOW GPU
E19 - 0103 - Colder solder joint under GPU or a bad Cap - REFLOW GPU
E20 - 0110 - Colder solder joint under RAM/GPU - REFLOW GPU/REBALL GPU
E25 - 0121 - Cold solder joint under CPU - CPU REFLOW
E32 - 0200 - Cold solder joint under GPU/RAM - GPU REFLOW
E33 - 0201 - Cold solder joint under GPU/RAM - GPU REFLOW
E35 - 0203 - GPU related, resistors
E46 - 0232 - DVD drive failure

/ \
\ / 2 RED AND 2 GREEN LIGHTS

E48 - 0300 - Cold solder joint under Southbridge/ Bad NAND update
E49 - 0301 - Faulty RF board/Cold solder joint under Southbridge/ Corrupt NAND
E50 - 0302 - Bad NAND update/ Cold solder joint under Southbridge
E51 - 0303 - Corrupt NAND
E52 - 0310 - Corrupt NAND/ Cold solder joint under Southbridge
E53 - 0311 - Corrupt NAND/ Cold solder joint under Southbridge
E54 - 0312 - Corrupt NAND/ Cold solder joint under Southbridge
E55 - 0313 - Corrupt NAND/ Cold solder joint under Southbridge

/ \
\ / 4 RED LIGHTS

4444 - No AV Cable/ HANA fault - ENSURE AV IS CONNECTED, IF SO HANA REFLOW

--==Console Reset Codes==--
Clear All Installed Game Updates and Console Cache

Go to the "system" blade
Select "memory"
Press Y on the HD symbol
Press X,X, Left Bumper, Right Bumper, X,X
A message will appear saying: "Do you want to perform maintenance on your Xbox 360 storage devices?"
Select Yes

Clear Any Failed system updates that cause the console to error.

With the console off, press and hold the sync up button (the small white one)
While holding the sync button press the power button to turn on the console
Continue to hold the sync button until the Console has booted up completely.
During the boot process the console should clear any failed updates, allowing you to use it normally.

LAST UPDATED:- 21/07/12 (Sp4rky)

Xbox Error Codes with Descriptions.pdf


...GUYS IF ANY OF YOU KNOW ANYMORE PLEASE PM A MOD/ADMIN SO WITH THE INFORMATION AND WE WILL UPDATE THE LIST AND IF YOU WISH TO COPY THIS AND PLACE ELSEWHERE PLEASE MAKE SURE YOU CREDIT BGA MODS FORUM
You do not have the required permissions to view the files attached to this post.
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 168 times
Set up: scotle hr 6000 and Ayoue 968

Xbox 360 ERROR CODES with Description

Sponsor

Sponsor
 

Re: ERROR CODES AND WHAT THEY MEAN

Postby sp4rkst4rt3r » Fri Jul 20, 2012 1:18 pm

Image You done a Image with that Image

How about creating it as a PDF then you can add a Image link

I'll increase your score accordingly :lol: :yeah:
sp4rkst4rt3r
VIP Member
VIP Member
 
Posts: 406
Joined: Sun Jun 17, 2012 5:25 pm
Location: NW England (Wigan)
Has thanked: 0 time
Been thanked: 15 times
Set up: ACHI IR PRO SC - Ayoue 968

Re: ERROR CODES AND WHAT THEY MEAN

Postby wills123 » Fri Jul 20, 2012 1:24 pm

add oo31 mate often a heat sink shorting :D
wills123
VIP Member
VIP Member
 
Posts: 2997
Joined: Wed Jun 20, 2012 8:44 pm
Location: kingslynn,norfolk
National Flag:
Great Britain
Has thanked: 573 times
Been thanked: 421 times
Set up: highly modded achi ir6000,2400w switched bottom,omega tc port,internal vac pump

Re: Xbox360 ERROR CODES AND WHAT THEY MEAN

Postby sp4rkst4rt3r » Fri Jul 20, 2012 1:28 pm

Here is a PDF of the OP's post.....

Xbox 360 ERROR CODES with Description.pdf
.....Latest Revision 20/07/12

Click on the link above and save to your HDD :ugeek:

I will Update the PDF file every time the DataBase is updated....

Brett hope you don't mind I edited the title because I deleted it in the PDF by mistake :roll:
You do not have the required permissions to view the files attached to this post.
sp4rkst4rt3r
VIP Member
VIP Member
 
Posts: 406
Joined: Sun Jun 17, 2012 5:25 pm
Location: NW England (Wigan)
Has thanked: 0 time
Been thanked: 15 times
Set up: ACHI IR PRO SC - Ayoue 968

Re: Xbox360 ERROR CODES with Descriptions

Postby brett1 » Fri Jul 20, 2012 2:13 pm

thanks sparks ideal mate anyway we can leave open for peeps to add to it???
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 168 times
Set up: scotle hr 6000 and Ayoue 968

Re: Xbox360 ERROR CODES with Descriptions

Postby sp4rkst4rt3r » Fri Jul 20, 2012 2:15 pm

Made it a sticky now and just doing a video of How To...Sticky a Thread for you :yeah:
sp4rkst4rt3r
VIP Member
VIP Member
 
Posts: 406
Joined: Sun Jun 17, 2012 5:25 pm
Location: NW England (Wigan)
Has thanked: 0 time
Been thanked: 15 times
Set up: ACHI IR PRO SC - Ayoue 968

Re: Xbox360 ERROR CODES with Descriptions

Postby DjAaron » Fri Jul 20, 2012 3:15 pm

good job man
DjAaron
VIP Member
VIP Member
 
Posts: 398
Joined: Sun Jun 17, 2012 7:58 pm
Location: Belfast
National Flag:
Great Britain
Has thanked: 22 times
Been thanked: 23 times
Set up: SCOTLE IR6000 , SAIKE 852D+

Re: Xbox360 ERROR CODES with Descriptions

Postby brett1 » Fri Jul 20, 2012 4:32 pm

still not right aaron needs tweaking alot still :P
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 168 times
Set up: scotle hr 6000 and Ayoue 968

Re: Xbox360 ERROR CODES with Descriptions

Postby Flashing360 » Fri Jul 20, 2012 7:36 pm

ok done some major editing, hope its ok brett.

guys please check over the errors and be sure to post here if you know any faults for errors not listed or other causes for the listed errors.
Flashing360
 

Re: Xbox 360 ERROR CODES with Description

Postby brett1 » Fri Jul 20, 2012 9:30 pm

karl thanks mate wanted to get something up and running so peeps can add theres to it please :D :D
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 168 times
Set up: scotle hr 6000 and Ayoue 968

Next

Return to Xbox 360

Who is online

Users browsing this forum: No registered users and 1 guest