Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Support forum for Scotle BGA rework stations.

Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby BGA_netherlands » Sun May 10, 2015 10:15 pm

Since a half hour ago the bottom IR heaters don't turn on. I set the temperature to 260C but it's stays on room temperature. Tried to set it first to zero and then again to 260C but the heaters won't kick in!

Somebody a idea how i can fix this?

Finally have profile running and now this problem... :facepalm:
BGA_netherlands
VIP Member
VIP Member
 
Posts: 175
Joined: Wed Oct 08, 2014 10:33 am
Location: Netherlands
National Flag:
Netherlands
Has thanked: 11 times
Been thanked: 10 times
Set up: 2x Seamark R5830 - Ecocell oven - 2x JBC CD-2 - Honton Hotplate - BOFA filter

Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Sponsor

Sponsor
 

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby dream_coder » Sun May 10, 2015 10:34 pm

Yep I had similar problem after running preheat twice to set bottom temps and found the reason
You do not have the required permissions to view the files attached to this post.
dream_coder
VIP Member
VIP Member
 
Posts: 157
Joined: Wed Feb 06, 2013 5:53 pm
Location: N East UK
Has thanked: 20 times
Been thanked: 13 times
Set up: Scotle IR PRO SC / IR360 Pro V3

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby BGA_netherlands » Sun May 10, 2015 10:48 pm

And what is it what is see on your picture? How can i fix this?
BGA_netherlands
VIP Member
VIP Member
 
Posts: 175
Joined: Wed Oct 08, 2014 10:33 am
Location: Netherlands
National Flag:
Netherlands
Has thanked: 11 times
Been thanked: 10 times
Set up: 2x Seamark R5830 - Ecocell oven - 2x JBC CD-2 - Honton Hotplate - BOFA filter

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby dream_coder » Sun May 10, 2015 11:17 pm

Mine was some sort of short.. Either caused by heat or bad wiring .. I am in process of replacing switches, npc wiring and upgrading bottom heaters as soon as my parts arrive, if your machine is still in warranty check with manufacturer/seller before opening it up as it may void any warranty, could be bad plates also but I wouldn't want you void your warranty without checking first
dream_coder
VIP Member
VIP Member
 
Posts: 157
Joined: Wed Feb 06, 2013 5:53 pm
Location: N East UK
Has thanked: 20 times
Been thanked: 13 times
Set up: Scotle IR PRO SC / IR360 Pro V3

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby BGA_netherlands » Mon May 11, 2015 12:40 am

dream_coder wrote:Mine was some sort of short.. Either caused by heat or bad wiring .. I am in process of replacing switches, npc wiring and upgrading bottom heaters as soon as my parts arrive, if your machine is still in warranty check with manufacturer/seller before opening it up as it may void any warranty, could be bad plates also but I wouldn't want you void your warranty without checking first


I have no warranty. Bought this machine second hands. (2013 model)
I go order new relais for it and check the wiring. I want also upgrade the heaters with elstein heaters.

This relais http://www.ebay.com/itm/Solid-State-Rel ... 1320541643 (is also a better one than the original part)
BGA_netherlands
VIP Member
VIP Member
 
Posts: 175
Joined: Wed Oct 08, 2014 10:33 am
Location: Netherlands
National Flag:
Netherlands
Has thanked: 11 times
Been thanked: 10 times
Set up: 2x Seamark R5830 - Ecocell oven - 2x JBC CD-2 - Honton Hotplate - BOFA filter

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby koubik » Mon May 11, 2015 6:33 am

Had this problem before. One relay gone bad, replaced both with better ones and it's working one year now without any problem.
User avatar
koubik
VIP Member
VIP Member
 
Posts: 286
Joined: Tue Dec 17, 2013 6:13 pm
Location: Greece
National Flag:
Greece
Has thanked: 15 times
Been thanked: 84 times
Set up: Scotle IR360 PRO V3

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby dream_coder » Mon May 11, 2015 8:28 am

Yeah them relays are reliable .. I hope you get it sorted also the ir360 has 3 relays maybe worth while doing all 3 at same time best of luck mate
dream_coder
VIP Member
VIP Member
 
Posts: 157
Joined: Wed Feb 06, 2013 5:53 pm
Location: N East UK
Has thanked: 20 times
Been thanked: 13 times
Set up: Scotle IR PRO SC / IR360 Pro V3

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby koubik » Mon May 11, 2015 9:42 am

http://www.bgamods.com/forum/viewtopic.php?f=12&t=3673&p=33759#p33759
My old post about the same problem.
Try swaping them and see if bottom plates working.
User avatar
koubik
VIP Member
VIP Member
 
Posts: 286
Joined: Tue Dec 17, 2013 6:13 pm
Location: Greece
National Flag:
Greece
Has thanked: 15 times
Been thanked: 84 times
Set up: Scotle IR360 PRO V3

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby BGA_netherlands » Mon May 11, 2015 3:07 pm

Thanks guys!

I will replace them all. Are the 3 relays the same?
BGA_netherlands
VIP Member
VIP Member
 
Posts: 175
Joined: Wed Oct 08, 2014 10:33 am
Location: Netherlands
National Flag:
Netherlands
Has thanked: 11 times
Been thanked: 10 times
Set up: 2x Seamark R5830 - Ecocell oven - 2x JBC CD-2 - Honton Hotplate - BOFA filter

Re: Scotle IR 360 pro V3 Bottom IR heaters don't turn on..

Postby koubik » Mon May 11, 2015 3:22 pm

There is 2 not 3 relays and yes they are the same
User avatar
koubik
VIP Member
VIP Member
 
Posts: 286
Joined: Tue Dec 17, 2013 6:13 pm
Location: Greece
National Flag:
Greece
Has thanked: 15 times
Been thanked: 84 times
Set up: Scotle IR360 PRO V3

Next

Return to Scotle

Who is online

Users browsing this forum: No registered users and 2 guests