Scotle HR460C

Support forum for Scotle BGA rework stations.

Scotle HR460C

Postby Flashing360 » Sun Jun 17, 2012 7:22 pm

Scotle-HR460C BGA rework station is with the similar functions as ZM-R5860C. They are different in some aspect and Scotle-HR460C is updated from the latter.

Below is main features for Scotle-HR460C:
1.Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.

2.t uses precise K-type close circuit control and with automatic temperature adjustment system and PLC, the temperature accuracy can be within ±2 deg C. Meanwhile, Scotle-HR460C is equipped with external temperature sensor which can detect real temperature and help to analyze and certify the profile efficiently.

3. The PCBA positioning uses V-groove which can help locate the PCBA quicker, more accurate and easier. It suitable for different sizes of PCBA positioning. 

4.Scotle-HR460C uses removable and retractable universal fixture which can protect PCBA from deformation ,and edge components from damage.It is suitable for reworking different component packages.

5. It is equipped with different kinds of alloy air nozzles which can be rotate in 360 degrees for positioning and they can be changed and replaced easily. 

6. Scotle-HR460C has three independent temperature zones, each is controlled by independent PID control and each one has its own temperature profile to make sure each zones to get best soldering and desolering effect. And Heating temperature, time, slope cooling and vacuum suction can all be finished through the TFT touch screen. 

7. Top and bottom temperature zones can be set 6 to 8 temperature files and can store more than hundred profiles for different BGA reworking. Users can select, analyze, set and certify the profiles on the touch screen. 

8.Scotle-HR460C cooling system uses high power cross flow fan which can cooling the PCB quickly to prevent deformation.
It is with built-in vacuum pump and external vacuum suction pen for picking up the BGA chips easily.

9. It is equipped with alarming function which will alarming 5-10 seconds in advance before the soldering or desoldering finished. 

10. Scotle HR460C is equipped with external camera system, and users can detect the melting process, which is the only diffrence with Scotle-HR460.

11. Scotle HR460C is equipped with emergency stop button and automatic power off device.
You do not have the required permissions to view the files attached to this post.
Flashing360
 

Scotle HR460C

Sponsor

Sponsor
 

Re: Scotle HR460C

Postby Flashing360 » Fri Jun 22, 2012 4:10 am

Courtesy of Scotle, this vid is the HR460 so is without the camera and monitor but the machine is the same.

[youtube]http://www.youtube.com/watch?v=c87DAZ8Eab8[/youtube]

We have the HR460C en route and will post our own video once received.
Flashing360
 

Re: Scotle HR460C

Postby Flashing360 » Fri Jun 22, 2012 4:19 am

Credit again to Scotle

[youtube]http://www.youtube.com/watch?v=U0I-8-A4IXI[/youtube]

shows how simple a chip lift is with this machine :)
Flashing360
 

Re: Scotle HR460C

Postby Flashing360 » Tue Jun 26, 2012 3:15 am

My HR460C should be here tomorrow so will post a review and some images of the machine :)
Flashing360
 

Re: Scotle HR460C

Postby sick360mods » Thu Jun 28, 2012 2:04 am

Looks very nice

Sent from my PC36100 using Tapatalk 2
sick360mods
Banned
Banned
 
Posts: 146
Joined: Wed Jun 20, 2012 4:03 pm
Has thanked: 0 time
Been thanked: 0 time

Re: Scotle HR460C

Postby brett1 » Thu Jun 28, 2012 8:34 am

nice looking machine couple things i noticed watching it didn't clean the chip off and no alu tape anywhere?????????
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 169 times
Set up: scotle hr 6000 and Ayoue 968

Re: Scotle HR460C

Postby Flashing360 » Thu Jun 28, 2012 11:22 am

Its purely to show the machine in action so cleaning wasnt necessary as the board would have just been binned.

No need for alu tape with hr :)
Flashing360
 

Re: Scotle HR460C

Postby brett1 » Tue Jul 03, 2012 2:40 pm

that is one hell of a top heater on that machine
brett1
VIP Member
VIP Member
 
Posts: 1126
Joined: Sun Jun 17, 2012 7:58 pm
Location: cornwall
National Flag:
Great Britain
Has thanked: 217 times
Been thanked: 169 times
Set up: scotle hr 6000 and Ayoue 968

Re: Scotle HR460C

Postby Flashing360 » Tue Jul 03, 2012 3:53 pm

its a beast mate.
Flashing360
 

Re: Scotle HR460C

Postby ChromeModz » Wed Oct 17, 2012 1:13 pm

bgamods wrote:My HR460C should be here tomorrow so will post a review and some images of the machine :)


so how is the 460? any profiles you could share?
ChromeModz
Valued Member
Valued Member
Progress to next rank:
30%
 
Posts: 33
Joined: Wed Oct 17, 2012 1:09 pm
Has thanked: 0 time
Been thanked: 0 time
Set up: Scotle HR460

Next

Return to Scotle

Who is online

Users browsing this forum: No registered users and 2 guests